PrimoPyro1990
							  




                              ....  Flamers ....
		         



DISCLAIMER: The following file contains information of harmful or illegal
            nature. Neither the BBS or author providing this information
	    can be considered responsible for the use of this information.
	    The person using this information is solely responsible for 
	    it's use or misuse.
	     
	     
I have to assume that the person attempting to build this has
some experience with fabrication or machine shop knowledge.
If you don't, please gain some experience before attempting to
build this device. It is very dangerous if not built correctly.
You may not get a second chance.


Flamers: Flamers, or one shot flamers, are simply one shot flamethrowers.
This device can, if constructed properly, can shoot a 10 ft. dia. ball of 
flame about 100 ft. The flame sticks to the target and is very destructive.
The flamer has been made by someone very close to the author and when
made correctly is safe to the operator.
Because of the availibility of parts it's hard to give measurements of 
different parts but this also gives some leeway in its construction.

A flamer is a hollow tube that contains an ignition system, a propellant
charge/delayed flame ignitor and a charge of napalm. The ignition system 
which can be mechanical or electrical, is trigerred. This in turn set offs
the propellant charge which pushes a barrier/delayed ignitor down the tube.
The barrier pushes the the napalm out the tube towards the target. The 
ignitor comes flying out and ignites the napalm 2 or 3 ft from the tube.

[...Slettet...]


                       
                          *** Kilroy was here ***